|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
IGD-8-326-E1F12-BH-FA Characteristics Symbol Irms Conditions no overload 110% overload, 60s every 10min 150% overload, 60s every 10min min. typ. max. 1230 Unit A A A V kHz V V V W C mF Electrical Data Tamb=40C, 3kHz, 650Vdc, 400Vac, cos=0,85 1200 920 1320 1390 1200 max. switching frequency DC voltage applied to the capacitor bank network voltage (line side), -20% / +15% 50Hz / 1min Tamb=40C Tvj for continous operation value 0...-15% expected lifetime calculated, forced air cooling expected lifetime calculated, w/o forced air cooling Controller Interface Data VS ISO VIT+ VITRIN ITRIPSC Ttp dv/dtAIR w Size Tstg Tamb Ths Alltitude Protection Pollution Fan Data Fan Type VFan fFAN IFAN PFAN included in the stack ( NO ) (SKF 16 O-230-01) Fan voltage Fan frequency Fan current Fan power 230 50 1.3 300 V Hz A W EN 50178 installation height w/o derating IP00 2 1000 supply voltage primary side supply current primary side (+ external current sensors) Input threshold voltage (HIGH) Input threshold voltage (LOW) Input resistance Over current trip level Over temperature protection level required airflow per fan approx. total weight Width x Depth x Height (with fan) w/o need of reforming the caps 1122 -20 -20 620 110 752 544 40 55 0.3*Vs 10 3600 100 21.6 24 270 26.4 1200 0,7*Vs V mA V V k APEAK C m3/h kg mm C C C m -40 40.18 Electrolyt 60 30 kHrs kHrs 10320 125 20 750 460 2500 VCES IGBT Module Stack Three-phase inverter SEMIKUBE - Size 3H IGD-8-326-E1F12-BH-FA fsw VDC VAC Visol Ptot Tj CDC C LTE Preliminary Data Features * Highly compact * Integrated current, voltage and temperature sensors * Easy maintenance * Easy mounting and dismounting * Very high Life-Time Expectancy * Very low inductive DC bus Capacitor Data Typical Applications * * * * * Industrial AC motor control UPS Solar inverter Oil and gas pumps No. 08800930 Footnotes Electrical parameters to be derated for Tamb > 40C Mechanical Data B6CI (c) by SEMIKRON Rev. 0 - 03.08.2009 1 IGD-8-326-E1F12-BH-FA PIN Array X1 PIN X1:01 X1:02 X1:03 X1:04 X1:05 X1:06 X1:07 X1:08 X1:09 Signal IF_PWR_VP IF_PWR_GND IF_PWR_VP IF_PWR_GND IF_PWR_VP IF_PWR_GND IF_CMN_rsrvd IF_CMN_GND IF_CMN_nHALT Function Power Supply IF_HB Power Supply GND_for_IF_PWR_VP Power Supply GND_for_IF_PWR_VP Reserved GND for IF_CMN_nHALT, IF_CMNrsrvd Status signal Digital IF_PWR_VP logicLOW (dominant) = not ready to operateHIGH (recessive) = ready to operate X1:10 IF_CMN_GPIO General purpose IO Inverted IF_CMN_nHALT signal Signal propagation time to IF_CMN_nHALT signal: 100s (typ.) X1:11 IF_CMN_ANLG0 Temperature analog out Max. output current: 5mA Turns ratio: 100mV/C Max. voltage range: +15V Nominal voltage range: 0...10V X1:12 X1:13 IF_CMN_AGND0 IF_CMN_ANLG1 GND for IF_CMN_ANLG0 UDC analog out Max. output current: 5mA Turns ratio: 10mV/V Max. voltage range: +15V Nominal voltage range: 0...10V X1:14 X1:15 IF_CMN_AGND1 IF_HB1_TOP GND for IF_CMN_ANLG1 Switching signal input (HB1 TOP switch) Digital IF_PWR_VP logic LOW = TOP switch off HIGH = TOP switch on X1:16 IF_HB1_TOP Switching signal input (HB1 BOT switch) Digital IF_PWR_VP logic LOW = BOT switch off HIGH = BOT switch on X1:17 X1:18 X1.19 IF_HB1_rsvrd IF_HB1_GND IF_HB1_ANLG Reserved GND for IF_HB1_TOP, IF_HB1_BOT, IF_HB1_rsrvd I analog out HB1 Max. output current: 5mA Turns ratio: 3mV/A Max. voltage range: 15V Nominal voltage range: -10...10V X1:20 IF_HB1_AGND GND for IF_HB1_ANLG Supply voltage +24VDC (10%) IN Supply voltage +24VDC (10%) IN Specifications Supply voltage +24VDC (10%) IN 2 Rev. 0 - 03.08.2009 (c) by SEMIKRON IGD-8-326-E1F12-BH-FA Connector X1 (Flat cable connector e.g. Harting) Productinformation of suitable female connectors and distributor contact information is available at e.g. http://www.harting.com (part number 09 18 520 7 813 - female connector with strain relief clamp). (c) by SEMIKRON Rev. 0 - 03.08.2009 3 IGD-8-326-E1F12-BH-FA SEMIKUBE GD-8HA, Px308/308 3D view of the SEMIKUBE Size '3' This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. (c) by SEMIKRON Rev. 0 - 03.08.2009 5 |
Price & Availability of IGD-8-326-E1F12-BH-FA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |